GB
SWITCHING ON AND USE
1. The cutting adjustment dial located at the front of the
device (6) allows you to select cutting length (Fig.3).
2. The selected length is shown on the graduated scale on
the right or left side of the clipper.
3. Press the on/off button.
4. You can adjust cutting length at any time.
5. Cutting length remains the same, no matter what angle
the clipper is held at.
6. To switch off the clipper, you just need to shift the on/off
button to « 0 » (7).
Do Not ExCEED 20 HouRS of CHARGiNG timE.
EXPERT ADVICE
Only use the clipper on hair or parts of the body that are
clean and dry. Cut using slow movements.
For the head
Ð
Move the clipper against the direction of hair growth.
Ð
For the back of the head, start at the neck, moving
towards the top of the head (Fig.5).
Ð
For the front of the head: start at the top of the forehead,
moving towards the back of the head.
Ð
For cutting around the neck and legs, use the clipper
without its trimming attachments and cut in a downwards
motion (Fig.6).
Ð
Keep the clipper in contact with your head or skin at
all times.
Ð
For a cut length of more than 30mm, and if you have
some experience, you can create cuts using the «comb» or
«fingers» (Fig.7).
For the body
Ð
Do not use the clipper after having used any type of cream.
Ð
Move the clipper against the direction of hair growth.
USING THE CUTTING GUIDE
The cutting guide allows hair to be combed to obtain
a precise, even cut.
This instrument is particularly effective on legs and at the
back of the neck. It is also very useful when cutting with a
« comb » or using the « fingers ».
CLEANING AND MAINTENANCE
Unplug and switch off the clipper before any cleaning
or maintenance.
Ð
Regularly clean the clipper’s blades. To do this, hold
the clipper in front of you and push on the blades in a
backward direction (Fig.8).
Ð
Use the cleaning brush to remove residual hair.
Ð
The clipper’s blades have a reservoir that distributes the
necessary amount of oil to ensure the clipper functions cor-
rectly. Nevertheless, it is advisable to add some additional
oil from time to time.
Never open the blade with a screwdriver.
Never charge the device near a heater, in a damp environment or in the sun.
This product is not to be used in the nostrils or ears.
This could cause superficial cuts or bleeding.
Technical characteristics :
• Rechargeable batteries
• Power supply : 230V – AC 50Hz
• Charging time : 8 H
• Net weight : 140 g
When the device reaches the end of its useful life and
you need to dispose of it, please abide by national rules.
We therefore ask you to dispose of it in a collection area
designated for this purpose, to ensure its disposal in a
manner that respects the environment.
Made in PRC
Summary of Contents for TONDEUSE CHEVEUX
Page 14: ......