8
USER’S GUIDE
NOTES
Please keep this operation manual for future use. This exercise machine is intended for home use only.
SAFETY NOTES
Prior to assembling this exercise machine and before the start of the
training, you should read carefully the following instructions. Safe and
effective use of the equipment can be ensured only if it is put together,
maintained, and used properly, as described herein. If you are not the
user yourself, please pass this operation manual to all users and inform
them about all the hazards and precautions.
Before beginning an exercise program, consult with your doctor to
determine whether there are any mental or physical conditions which
could pose a risk to your health and safety. Talking with your doctor can
also protect you against the improper use of the equipment. Your doctor
will determine whether it is suitable to use medications that affect the
heart rate, blood pressure or cholesterol.
Pay attention to your body’s signals. Improper or excessive exercises can
negatively affect your health. An exercise should be discontinued
immediately if you experience any of the following symptoms: pain,
tightness in the chest, irregular pulse, particularly shortness of breath,
fainting, dizziness, nausea. If any of these symptoms occur, you should
contact your doctor immediately and stop training theretofore.
Children and pets should be kept away from the equipment. The exercise
machine is intended only for adults.
The equipment must be placed on a smooth, solid and hard surface,
which is secured by a mat or carpet. The exercise machine is intended
for internal use only.
Before beginning an exercise program, make sure that all bolts and nuts
are thoroughly tightened up. Please pay special attention to the parts that
are most exposed to wear.
Safety of the equipment can be guaranteed only if it is maintained and
inspected on a regular basis.
You should always use the equipment for its intended purpose. If during
its installation or use whichever part proves to be defective, or it produces
disturbing sounds, you should stop using the equipment and return it to
the service and repair shop. Damaged parts must be replaced
immediately or you must stop using the exercise machine until it has been
repaired. Do not use damaged equipment.
During your training, you should wear proper exercise outfits. Avoid loose
clothing that could catch on equipment and cause an injury or clothes
that could restrict or prevent your movements. Make sure to remove any
jewellery during your workout.
When running, make sure the plastic clip is fastened on your clothing. It
is for your safety, should you fall or move too far back on the treadmill.
Keep hands away from all moving parts
According to EN 957 standard the equipment has been categorized as H
operational use class and C accuracy class, and it is designed exclusively
for home use. It cannot be used as therapeutic or rehabilitation
equipment. The equipment is not suitable for therapeutic purposes.
The maximum permissible weight of the user is 130 kg’s.
When lifting or moving the equipment, you should maintain a proper
posture to prevent any damage to the spine.
During installation of the equipment, you must strictly adhere to the
enclosed instructions and make use of the supplied parts only. Before
installation, check whether all the parts that are contained on the attached
list, are included.
It s not recommended to leave any adjustment device, which could
interfere with the user’s movements, in such a position that protrude any
part thereof
WARNING: Before using the magnetic treadmill, please read these
instructions. We do not accept any liability arising from any injury or
damage to any items that have been caused by misuse of this product.
WARNING! Heart rate monitoring system May be inaccurate. Over
excercising May result In serious injury Or Heath. If you feel faint stop
excercising immediately.
Health injury may result from the incorrect or too intensive training.
TECHNICAL SPECIFICATIONS
Dimensions of the assembled exercise machine: 195 x 86 x 130 cm
Running belt: 50 x 142 cm
Maximum weight of the user - 130 kg
Voltage: ~ 220-240 V (50/60Hz)
LIST OF PARTS (DIAGRAM, P. 51)
1x assembled treadmill
1x safety key
1x imbus 6mm
1x bootle of silicone
1x manual
INSTALLATION INSTRUCTIONS
Pictures
– p.
FOLDING AND TRANSPORT OF THE TREADMILL
Don't try to move the treadmill if it's not folded and locked. Make sure that
the plug is disconnected from power supply.
To fold the treadmill, the running area must be raised with both hands until
a gentle signal is heard, informing that the treadmill has been correctly
locked in vertical position.
To assemble the treadmill, the coloured element on the piston situated
under the treadmill belt should be pressed with one foot, which will release
the lock. Next, the treadmill belt should be gently pulled down and the
operator should back 2 metres away from the treadmill as it will unfold
automatically. Please refer to the drawing 1 (p. 55).
ATTENTION: Folded treadmill cannot be operated and utilized. Stop the
treadmill belt before folding the equipment. Folded treadmill should be
disconnected from power supply. Don't start the treadmill when it's folded.
To move the treadmill, raise it gently onto the rear transport rolls and move
it to the desired location, holding on both sides.
ATTENTION: Before transporting the treadmill make sure that it is
disconnected from power supply. The device should always be transported
by two persons..
TREADMILL BELT
Belt tension adjustment
Belt Tension Adjustment-It is very important for joggers and runners in
order to provide a smooth, steady running surface. Adjustment must be
made from the right and left rear roller in order to adjust tension with the
Hexagonal Wrench provided in the parts package. The adjustment bolt is
located at the end of the rails as noted in diagram below.
Note: Adjustment is thru the small holes on the end caps.
Tighten the rear roller only enough to prevent slippage at the front roller.
Turn both the right and left bolt clockwise reasonably and inspect for proper
tension. When an adjustment is made to the belt tension, you must also
make a tracking adjustment to compensate for the change in belt tension.
DO NOT OVERTIGHTEN - Over tightening will cause belt damage and
premature bearing failure.
Belt tracking adjustment (picture, p. 55)
This treadmill is designed to keep the belt reasonably centred while in use.
It is normal for some belts to drift near one side while the belt is running
with no one on it. After a few minutes of use, the belt should have a
tendency to centre itself. If during use, the belt continues to move toward
one side, adjustments are necessary. The procedures are as below:
▲ First set speed at lowest position.
EN