Spokey 926198 Manual Download Page 9

Page: 9 / 48

www.spokey.eu

www.spokey.pl

SAFETY KEY

A safety key is intended to deactivate the treadmill immediately if you fall
down.  It  serves  as  an  emergency  stop.  The  safety  key  must  be  used  in
urgent cases only.
For  safe  and  convenient  stop,  use  STOP  button  until  the  treadmill  stops
completely. Once you have pressed STOP, the treadmill belt will gradually
decreased its speed. The treadmill will not activate until you have inserted
the safety key in the key hole located in the centre of the counter control
desk,  which  provides  additional  protection  to  treadmill  activation  by  third

parties. The other end of the key must be attached to clothes. If you fall
down, the safety key will fall out the control desk and the treadmill will stop
immediately. If the device does not detect the security key, the display will
show the „E07” error message or „---„. The error will also be signalled with
a sound.
During the workout, the removal of the safety key will result in an immediate
stop of the treadmill belt. Removing the safety key will also clear the current
training data. Use only in urgent situations counter.

Activation

Connect the plug to the socket, the counter display turns on and the track
goes into standby mode.

SLEEP MODE

After 10 minutes of inactivity, the track goes into sleep mode and the
counter is turned off. Press any button to resume the track.

BUTTON FUNCTIONS

START  press to start the training or a chosen programme. 3 seconds after
the start, the running belt will start moving at the lowest possible speed or
at the speed corresponding to a chosen programme.
STOP  Press to stop the training. The treadmill will be slowing down until it
stops completely.

PROG press to choose automatic programs
MODE selection of manual modes
+/-: adjusting the speed during workout, setting the desired parameters in
manual modes.
3, 6, 8, 10: quick adjustment of speed during training

DISPLAY INFORMATION

SPEED: current speed.

CALORIES.: calories burnt during the current training session.

TIME: exercise time of the current training session.

DISTANCE: distance covered during the current training session.

MEASUREMENT RANGE

Programme duration

– default: 30 minutes, adjustable between 8:00 and

99:00

Speed

– adjustable between 1 and 10 km

Calories

– default: 50, adjustable between 0 and 999

PROGRAMS

The track is fitted with 12 preset programs, manual mode.

Program selection, starting and ending workout

To  go  to  the  selected  program  or  mode,  press  the  PROG  button  until  it
appears on the display.
After setting  the training mode,  press the  "START"  button.  The track  will
start  in  three  seconds,  slowly  accelerate  to  the  displayed  value  and
eventually it will run smoothly at a constant speed.

A) While running, press "SPEED +", "SPEED-" or "quick speed key" button
to adjust speed to your needs.
b) Pressing the "STOP" button causes the track to stop.

QUICK START

You  don’t  have to choose  a  programme for  a  quick start.  In  the manual
mode  you  can  set  the  speed  while  running  by  pressing  the  speed
adjustment buttons (SPEED).

The training starts 3 seconds after pressing START button and stops after
pressing STOP button.

MANUAL MODE

In the workout time selection mode, the display will show 30:00 minutes by
default. Using the „+/-„ buttons, adjust the desired workout time (value
range between 8:00

and 99:00 minutes). Press „START” to commence

workout.

In the workout distance selection mode, the display will show 1.0 km by
default. Using the „+/-„ buttons, adjust the desired distance (value from the

range between 1.0 and 99.0 km). Press „START” to commence workout.
In the calories burn selection mode, the display will show 50 cal. by default.
Using the „+/-„ buttons, adjust the desired level of calories burn (value
range between 20 and 990 calories). Press „START” to commence
workout.

PRE-SET PROGRAMMES (AUTOMATIC MODE)

Pre-set  programmes  provide  interesting,  balanced  trainings  of  different
levels. While looking through the programmes, their process is displayed
on  the  counter  (speed  distribution  in  time,  diagrams  p.  47).  Among  12
programmes there are also some easier interval versions as well as more
challenging ones. It provides a wide range of options meeting users’ needs
Select  the  program  by  pressing  the  PROG  button  repeatedly.  After
selecting the program, use the SPEED button to set the workout time. The

system  will  divide  this  time  into  20  sections,  the  speed  will  change
automatically  when  moving  to  the  next  section.  During  the  training  the
speed of the treadmill belt can be changed by pressing the SPEED button.
The training starts 3 seconds after pressing START button and stops after
reaching the time limit or pressing STOP button.

TROUBLESHOOTING

E01: no connection between the controller and the console

Disconnected cable between the
controller and the console

Connect the cable. Replace the
cable if it is damaged

The display does not work

Replace the console

The controller does not work

Replace the controller

E02: The controller does not receive the power signal

The motor cable is disconnected

Connect the motor cable

No voltage or incorrect operation
of the controller