5
M
ISO
VIB
Instrument parts
A Measuring probe (VC200)
B Sensor input
C Graphical display with LED backlight
D MEASURE key
E Navigation keys
F BACK key and power on
G Mini-B USB communication output
Instrument overview
A
B
C
F
D
E
G
General description
VibChecker is an instrument for fast and easy measurement of machine condition in preventive mainte-
nance. The instrument and the monitoring techniques are based on the recommendations of ISO2372 and
ISO10816 (Part 2,3,4 >600 RPM) standards for broadband measurement of vibration. These standards
make the assumption that limited information, obtained easily and at a low cost, is often as useful as a
detailed analysis using expensive equipment and elaborate techniques.
VibChecker is battery powered and designed for use in harsh industrial environments. The graphical
display (C) shows the condition readings
and − if ISO 10816 or ISO 2872 is activated − provides evalu-
ated machine condition in green-yellow-red.
The instrument has a built-in probe sensor (A). The external sensors with magnets TRM100, TRM120,
and all types of SPM vibration sensor series SLD for permanent installation can also be used, connected
to the sensor input (G). It is push-key controlled and basic measurement setup information is entered
manually. Evaluated measurement results are indicated by green-yellow-red condition indicators and an
FFT spectrum is produced for pattern recognition. Up to ten readings can be saved to memory.
Summary of Contents for VibChecker
Page 4: ...2 ...