14
Vibration quantity and amplitude units
The selected vibration quantity (acceleration, velocity, or
displacement) affects the unit for the result shown in the
Measurement
display as well as the spectrum and time
signal unit. The default setting is Velocity (VEL).
To set the vibration quantity:
1. Go to the
Main
display (A).
2. Use the arrow keys to navigate to the
General settings
icon (B), then press
ENTER
.
3. In the
General Settings
menu, select the
AVD
icon (C)
and press
ENTER
.
4. In the first of two
AVD
displays (D), use the
UP
/
DOWN
arrow keys to highlight the appropriate vibration quan-
tity and press
ENTER
to mark it. The second display
opens (E).
NOTE: If an ISO standard has been activated in the
ISO setup
display, only VEL can be selected here (for
more information, see section ‘ISO standard setup’).
5. Using the
UP
/
DOWN
arrow keys, highlight the check-
box of the metrics to show in the
Measurement
dis-
play, and press
ENTER
to mark your choice.
6. To save the settings, use the
DOWN
arrow key to
highlight the
SAVE
checkbox and press
ENTER
.
To return to the
Main
display, press the
BACK
key.
A Main display
B
D
AVD display 1/2
E
AVD display 2/2
General settings
C
Summary of Contents for VibChecker
Page 4: ...2 ...
