11
Settings
Default settings
Below is a summary of the main instrument settings and their respective factory default values:
ISO standard = OFF (no condition evaluation will take place)
ISO 10816 default settings = PART 3, GROUP 1, SUPPORT Rigid
ISO 2372 default settings = CLASS 1, RPM 1500
Vibration
quantity
= VEL (velocity)
Amplitude units = Velocity rms and Peak
Units = Metric, Hz, vibration amplitude in g turned off
Averaging turned off
Number of lines = 200
External transducer = 10 mV/m/s2, settling time 3.0 seconds
Display contrast = Max
Dim time = 20
System of measurement and units
Available settings include the metric or imperial sys-
tem; frequency in Hz (Herz, cycles per second) or CPM
(cycles per minute - similar to RPM); and acceleration
in g or m/s2.
To make your settings:
1. Go to the
Main
display (A).
2. Use the arrow keys to navigate to the
General Set-
tings
icon (B), then press
ENTER
.
3. In the
General settings
display, select the
Units
icon
(C) and press
ENTER
.
4. In the
Units
display (D), use the
UP
/
DOWN
arrow
keys to highlight a checkbox (Metric (millimeters) or
Imperial (inch); Hz or CPM; and g). For each selec-
tion, press
ENTER
to mark your choice.
5. To save the settings, use the
DOWN
arrow key to
highlight the
SAVE
checkbox and press
ENTER
.
To return to the
Main
display, press the
BACK
key.
A Main display
B
General settings
C
Units
D
Summary of Contents for VibChecker
Page 4: ...2 ...
