PCS 560 User Manual
5 Series/V3.2/0708/1
1
Introduction
PCS 560 User Manual
Introduction
About this manual
This manual contains all that you need to know to operate your PCS 560 connected to a
SpliceCom maximiser system using version 3.2 software. This manual assumes that the
PCS 560 telephone has been connected and configured by your System Administrator, and is
ready for use. If this is not the case please refer to your System Administrator for further
assistance.
How your PCS 560 will operate
Your User Account
You are a “User” of the SpliceCom maximiser telephone system and as such you have a User
account on the system. Your User name will be used to identify you as you make, receive
and transfer calls. Each of your colleagues will also have a User account and will be identified
in the same way, by their User name. A list of the Users of your telephone system can be
viewed via the Directory as explained from page 19.
Logging On
In most implementations the PCS 560 will be your permanent desktop phone and such it will
have been automatically allocated to you by your System Administrator therefore there will be
no need for you to log in or log out. However, if you are a Hot Desk User, in other words a
User who has been given the ability to log in to any phone on the system because, for
example, you need to move around the building or you are rarely in the office and do not
need a permanent telephone please refer to page 51 for further information.
Idle Page
The default display on your telephone when idle will display the SpliceCom logo together
with your User Name, extension number and the current date and time. If you wish to
change your idle page please refer to page 32.
Headset Operation
When a headset is connected to the PCS 560 the telephone will operate in hands free mode.
Please refer to page 12 for further details.
