3. To resume the Right Front Chain Cover, put it on the mainframe and plug in the electric wires
back to the AC power switch. Locate 2pcs of
ψ
3.5x20 Self Tapping Screws (107) with 2pcs of
ψ
5
x16x1.5T Flat Washers (78) on the mainframe loosely then tighten 2pcs of 5x16 Tapping Screws
(102) on the mainframe and tighten up all loose screws.
4. Match Left Front Chain Cover (29) with Right Front Chain Cover (30) and secure both covers
with 7pcs of
ψ
3.5x12 Self Tapping Screws (103) and then 2pcs of 5x16 Tapping Screws (102).
5.Disassembling/Assembling Belt (54) and Idle Arm (10) Note: Must be done
after Front Chain Covers (L) and (R), (29 and 30) have been released.
1.Use 13 m/m wrench to release M8x7T Nut (88) and take off the J-Bolt (87).
2. Use Phillips Head Screw Driver to unscrew 3pcs of M6x7T Phillips Head Screws on Idle Arm (10)
and the Belt (54) can be taken off.
3. To release the Idle Arm (10), Unscrew 3pcs of M6x15 Phillips Head Screws (98) with 3pcs of
ψ
1/4" Split Washers (80) and 3pcs of 1/4”x13x1T (72).
