4pcs of
ψ
1/4"Split Washers (80) and you can release Generator Flywheel (55).
2. Reverse the above step to resume the Generator Flywheel (55).
8. Disassembling/Assembling Cylinder (57)
1. On Left and Right Cup Holder (38, 39) use Phillips Head Screw Driver to unscrew 4pcs of
ψ
4x16
Self Tapping Screws (105) to take off Cup Holders (38,39)
2. Use M5 Allen Wrench/Phillips Head Screw Driver Combination (115) to take off the Release Lever
(40).
3. Use wrench to release adjusting nut on the Seat Recline Release Cable (58) to take off the cable.
4. Use 12 m/m and 13 m/m wrenches to unscrew the 5/16" x1- 3/4"(Grade 8) Hex Head Screw (70)
with 5/16" x 19 x 1.5T Flat Washer (76) and 5/16" x 6T Nut (91), which are under the Set Back Frame
(5).
5. Use Phillips Head Screw Driver to unscrew M5x12 (99) on Plastic Seat Carriage Cover (125) then
