1. Dismantle and Replacement
1. Console (19) dismantle and assembling
Unscrew 4pcs of M5x12m/m Phillips Head Screws (99) with Phillips Head Screw Drier (114) and
the Console can be released.
2 Handle (3) and Console Mast
1. Take off the Handle Bar Cover (141) then use 12/14 m/m wrench (112) to release 2pcs of
5/16”x15 Hex Head Screws (68), 2pcs of
ψ
8x1.5T Split Washers and 2pcs of 5/16”x19x1.5T
Flat Washers (76) and the Handlebar Assembly (3) can be released.
2. Reverse the above step to resume the Handlebar Assembly (3).
3. Release the Console Mast Cover by flapping or pressing it with hand as shown in the figure below.
Use 12 m/m wrench to unscrew 6pcs of 5/16”x15 Hex Head Screws (68) together with 4pcs of
5/16”x19x1.5T Flat Washers (76) and 2pcs of 5/16”x20x1.5T Curved Washers (83) and the
Console Mast can be released.
