4. To resume the Console Mast (2), guide the computer cable through the Console Mast (2) and out
of the console plate first and the use 12 m/m wrench to tighten 6pcs of 5/16”x15 Hex Head
Screws (68) together with 4pcs of 5/16" x 19 x 1.5T Flat Washers (76) and 2pcs of 5/16" x20x
1.5Tcurved Washers (83).
3.Disassembling/Assembling of Cranks (51L, 51R) and Pedals (116, 117)
1.Use 13/15m/m wrench to turn the Left Pedal (116) clockwise and Right Pedal (117)
counterclockwise to disassemble these two pedals.
2.
To resume the pedals, turn the pedals with reversal orientations.
3. Take off the Crank Arm End Cap (28) and release the M10x1.0 Nut (108) by using the wrench.
