3/8”x4”Hex Head Screws (67) with 2pcs of 3/8"x7T Nut (89) by using 2pcs of 14 m/m wrench.
10. Disassembling/Assembling Rear Chain Covers (L) and (R) (35, 36)
1. Use Phillips Head Screw Driver to unscrew 7pcs of
ψ
3.5x12 Self Tapping Screws (103) and 2pcs of
5x16 Tapping Screws (102), which are on Left Rear Chain Cover (35). Unplugging Handpulse wire (26)
and Left Rear Chain Cover can be released.
2. On the Right Rear Chain Cover (36), unscrew
ψ
3.5x20 Self Tapping Screws (107) with
ψ
5
x16x1.5T Flat Washers (78) and 2pcs of 5x16 Tapping Screws (102) and the Right Rear Chain Cover
(36) can be released.
3. To resume the Right Rear Chain Cover (36), secure the Cover onto the mainframe with
ψ
3.5x20 Self
Tapping Screws (107) with
ψ
5 x16x1.5T Flat Washers (78) and 2pcs of 5x16 (102) Tapping Screws.
To resume Left rear Chain Cover (35), plug in the Handpulse Wires (26) then match Left and Right
Chain Covers and secure with 7pcs of
ψ
3.5x12Self tapping Screws (103) and 2pcs of 5x16 Tapping
Screws (102).
11. Disassembling/Assembling of Seat Carriage (4)
Note: Must be done after Rear Chain Covers (L) and (R) (35, 36) have been
released.
1. Use Phillips Head Screw Driver to unscrew and release
ψ
13x19 x26.5L Seat Stop (16), M6x15
Phillips Head Screw (98) with 1/4"x19x1.5T Flat Washer (73) and Seat Stop Axle. Press the Release
