Customer Service 1-888-707-1880
Email: [email protected]
15
STEP 4
1. Plug the Computer Cable (No.152), CSAFE Connecting Wire (No.150), Communication Cable
(No.149), HDMI Connecting Wire (No.151), and Handpulse w/Cable Assembly (No.40/41) into
the corresponding connectors on the back of the Console (No.31). Mount the Console (No. 30)
to the Mast with 4 Screws (No.97).
2. Install 4 Swing Arm Covers (No. 77/76 left & 78/79 right) with 6 Screws (No.134).
3. Install 4 Covers (No. 74x2 & 75x2) to the ends of the Pedal Arms with 4 Screws (No.97) and 4
Screws (No.134). Be careful not to install these covers upside down! There is an arrow on the
inside of each cover to indicate the correct installation direction.
4. Install the 4 Covers (No.72 x 2 & 73 x 2) to the connection point at the bottom of the swing
arms using 4 Screws (No.134) and 4 Screws (97).
5. Install the Front Stabilizer Cover (No.66) with 4 Screws (No.97).
