SPINNER® BL ADE AND SPINNER® BL ADE ION
OWNER’S MANUAL
www.spinning.com 800.847.SPIN (7746)
19
STEP 10:
INSTALL THE PEDALS
Turn the resistance knob clockwise until the
crank arms are immobilized. Remove the
pedals from the packaging. Install the
left
pedal
on the
left crank
. Use the (15mm) multi-
wrench supplied and turn
counterclockwise
to tighten. Install the
right pedal
on the
right
crank
. Turn the multi-wrench
clockwise
to tighten.
Remember, pedals are always
tightened by turning the wrench over the
top of the spindle towards the front of the
bike.
Be sure both pedals are tightened
securely.
STEP 11:
LEVEL THE BIKE
Move the bike to the location where it will be
used. Your Spinner® Bike requires 4 x 6 feet
of floor space for proper operation. Rock the
bike gently to check for wobble. If needed,
use the leveling adjusters under the front
and rear stabilizer bars to steady the bike.
Turn the leveling feet counterclockwise to
decrease the height or clockwise to increase
the height until the bike is stable
11
10
NOTE: The pedal spindles and cranks
are marked “L” (left) and “R” (right).
Left and right are referenced from a
seated position on the bike. Be sure
to install the pedals on the correct
side of the bike.
