SPIERINGS SK599-AT5 Manual Download

Page: 139 / 238

SK599-AT5
Driving
Truck

SPIERINGS MOBILE CRANES USER MANUAL V 0.1

4-65

ges

d t

res

ed.

ings

obi

ran

–

ll r

ight

rve

4.17.4.

Towing with damage to the transfer case

If the transfer case is defective, the same procedure can be followed as described in

§ 4.17.1. Towing

with functioning diesel engine, service brake and steering system

However, there are some additional problems:

1. The drive is eliminated:

Remove the drive shafts on the output shafts of the transfer case.

For more information, see

§ 4.17.3.1. Remove drive shafts on output shafts of the

transfer case

2. The power-assisted steering is not (fully) functioning properly.

For more information, see

§ 4.17.3.2. Power-assisted

steering.

4.17.5.

Towing with damage to the driven axles

Only skilled, qualified and trained personnel is in this situation allowed to take measures for towing of

the vehicle.

CAUTION!

If there are any questions or doubts, please contact Spierings Mobile Cranes.

Summary of Contents for SK599-AT5










































































































































































































































Search results

Summary of Contents for SK599-AT5

Reviews:

Related manuals for SK599-AT5

Brands by name

Popular brands

SPIERINGS SK599-AT5, Manual

Search results

Summary of Contents for SK599-AT5

Reviews:

Related manuals for SK599-AT5

Brands by name

Popular brands