SPIERINGS SK599-AT5 Manual Download

Page: 115 / 238

SK599-AT5
Driving
Truck

SPIERINGS MOBILE CRANES USER MANUAL V 0.1

4-41

ges

d t

res

ed.

ings

obi

ran

–

ll r

ight

rve

4.13.4.1.

Longitudinal differential lock

Enable longitudinal differential lock

Enable the

longitudinal differential lock

by means of switch

longitudinal differential lock

on the control

panel:

The longitudinal differentials will be locked;

The symbol

longitudinal differential lock

on the main screen flashes till all longitudinal differentials

are enabled. After that, the symbol remains continuously active.

Disable longitudinal differential lock

Disable switch

longitudinal differential lock

on the control panel:

The locks of the longitudinal differentials will be disabled;

The symbol

longitudinal differential lock

on the main screen flashes till all longitudinal differentials

are disabled. After that, the symbol disappears.

Measures if the longitudinal differential lock is not automatically disabled

If the symbol

longitudinal differential lock

flashes, not all

longitudinal differential locks

are

enabled/disabled:

See

§ 3.9.2.2. Main screen: Differential indication screen

for an overview of the enabled

longitudinal and transversal differential locks;

Swing shortly and slowly when driving away.

If the symbol

longitudinal differential lock

remains flashing:

Outrigger the truck to release the wheels from the ground to eliminate any friction of the axles.

4.13.4.2.

Transversal differential lock

Use the

transversal differential lock

if there is still not enough grip when using

longitudinal differential

locks

Enable transversal differential lock

CAUTION!

Disable the longitudinal differential lock before driving on the paved road.

CAUTION!

Check after disabling the longitudinal differential lock if all longitudinal
differentials are disabled.

CAUTION!

•

Enable/disable the transversal differential lock may only be done when the
vehicle is not moving, there is no steering and the longitudinal differential
lock is already enabled;

•

NEVER disable the longitudinal differential lock before disabling the
transversal differential lock.

Summary of Contents for SK599-AT5










































































































































































































































Search results

Summary of Contents for SK599-AT5

Reviews:

Related manuals for SK599-AT5

Brands by name

Popular brands

SPIERINGS SK599-AT5, Manual

Search results

Summary of Contents for SK599-AT5

Reviews:

Related manuals for SK599-AT5

Brands by name

Popular brands