SK599-AT5
Diesel engine truck
Truck
10-8
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll r
ight
s
re
se
rve
d
.
Checking the coolant level must be done as mentioned below.
1. Turn off
cap A
) of the
expansion tank
;
2. Check if the coolant reaches the edge of the filler neck;
3. Top up coolant, if necessary (see
§ 10.3.2. Topping up coolant diesel
4. Close the filler neck by using the cap.
10.3.2.
Topping up coolant diesel engine truck
1. Turn off
cap A
) of the
expansion tank
;
2. Top up the expansion tank with coolant, until the fluid level reaches the edge of the filler neck
(see
3. Turn on the heating in the truck cab at maximum temperature:
-
This causes the heater valve to be fully opened;
4. Start the engine;
5. Top up coolant if the level drops. Keep checking during the time the engine is running:
-
Let the engine run to warm up; if the operating temperature is reached, the thermostat
will be opened;
6. Stop the engine if the coolant level is not lowering anymore;
7. Close the filler neck by using the cap.
CAUTION!
Never unscrew the cap of the filler neck of the expansion tank if the engine is
warm.
Hot coolant is under pressure and may be sprayed when unscrewing the cap!
CONDITIONS
The engine must be cold.
Picture 10-8
A
