SK599-AT5
Driving
Truck
4-44
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll
ri
ght
s
re
se
rve
d
.
Retracting of axle 3 is a fully automatic procedure:
1. All axles are fully retracted, the vehicle is lowering;
2. The axle height of axle 3 is blocked;
3. Axles 1, 2, 4 and 5 are adjusted to the
driving mode
, the vehicle moves upwards;
4. The buzzer becomes active.
Axle 3 has lost contact with the ground.
Activating steering program small turning cycle from manual, crab steering or wall steering
If steering program
small turning cycle
is chosen while the steering program
manual
,
crab steering
or
wall steering
is active, the vehicle will level and the retracted axle 3 will be unblocked.
Disabling steering system
Put switch
steering system on the road / off the road
on the control panel to
on-the-road mode
:
-
The maximum vehicle speed is limited to 83 kph (52 mph);
-
The
longitudinal differential lock
is automatically disabled:
•
The symbol
longitudinal differential lock
on the main screen flashes till all
longitudinal
differentials
are disabled. After that, the symbol disappears.
-
The vehicle is automatically
levelled
:
1. All axles are fully retracted, the vehicle is lowering;
2. The axle height of axle 3 is unblocked;
3. The axles are adjusted to the
driving mode
, the vehicle moves upwards;
4. The buzzer becomes active when levelling is ready;
-
The
control panel steering system
becomes inactive.
CAUTION!
Switching between on the road / off the road mode is only allowed if the vehicle is
not moving!
CONDITIONS
When switching from off-the-road mode to on-the-road mode, make sure that all
axles are moved to the straight forward position before driving away.
