SK599-AT5
Driving
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
4-45
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll r
ight
s
re
se
rve
d
.
4.13.5.1.
Steering program: Small turning cycle
With this steering program, it is possible to drive with an extra
small turning cycle
Activating steering program
Enable steering program
small turning cycle
by using the key on the
control panel steering system
:
-
The red indicator above the key becomes active when the steering program can be carried out
successfully;
-
After enabling the off-the-road mode, the maximum vehicle speed is limited to 15 kph (9.4 mph).
Using steering program
Axles 1 and 2 are mechanically steered by the steering wheel, axles 4 and 5 are steering in the
opposite direction.
Examples
The
display control panel steering system
shows the current steering position of the rear axle.
In combination with the chosen steering program, the current steering position of the vehicle can be
determined (
However, this is just an indication. The real situation may be different.
Message
Description
All axles are in straight forward position.
The vehicle will make a slight turn to the left (the position of the rear
axle is opposite to the steering direction).
The vehicle will make a maximum short turn to the right (the
position of the rear axle is opposite of the steering direction).
Picture 4-14
Table 4-5
