© 2014 Spicetone OÜ www.spicetone.com Võistluse 9, Tallinn 10132, Estonia, European Union
SEQ MODULATION MODE
Menu 3 Clock 11: Off (D) / Parameter (
G
) / Pan (
Y
) / Filter (
R
)
You can turn on sequenced modulation on mono channel:
MONO CHANNEL SEQ (0)
Menu 3 Clock 12: On (
G
) / Off (
R
)
In sequencer menu the main POTS change the corresponding sequenced modulation depth.
Depending on your settings, the main functions, panning or filter can be modulated. Note that
turning the depth past the mid-point (yellow light) counter clockwise reverses the shapes.
DRIVE / PAN1 / FILTER FREQ A MOD DEPTH
Menu 3 Pot 1
GAIN / PAN2 / FILTER FREQ A MOD DEPTH
Menu 3 Pot 2
TONE / PAN3 DEPTH
Menu 3 Pot 3
LEVEL / PAN4 / FILTER VOLUME MOD DEPTH
Menu 3 Pot 4
MONO / PAN5 / FILTER RESONANCE DEPTH
Menu 3 Pot 5
DRY / PAN6 DEPTH
Menu 3 Pot 6
The four knobs in the middle set SEQ Frequency and SEQ Level. You can also apply more or less
modulation on lower or higher strings, using familiar spread function.
SEQ FREQUENCY / RELATION TO LFO 1
Menu 3 Pot 7
SEQ FREQUENCY SPREAD
Menu 3 Pot 8
SEQ LEVEL (MOD AMPLITUDE)
Menu 3 Pot 9
SEQ LEVEL SPREAD
Menu 3 Pot 10
Troubleshooting to get SEQUENCER going! Checklist:
o
Is SEQ on? (Menu 3, Clock Position 11)
o
You must define a sequence type in Menu 3 Submenus, available in Clock
positions 7 and 8
o
SEQ does not start with preset; set it to start with preset (Menu 3 Clock Position
9 Green)
o
You must turn at least one of the Pots 1…6, thus defining sequenced modulation
depth for at least one parameter.
o
In Menu 3, Pot 9 that controls modulation amplitude, must not be in zero
position.
6.5 M
ENU
4
AND
M
ENU
5. LFO 1
AND
LFO 2
Menu 4 (POT04 blinking), Menu 5 (POT05 blinking).
There are two LFOs, which may have different shapes: sine, triangle, pulse, rising or falling saw
and random level (Menu 4&5, Clock 7 and/or 8). Experiment.
LFOs may run at independent tempo, but can be controlled externally by MIDI (CC #1, CC #2 or
Pitch Bend) (Menu 4&5 Clock 9). LFO 1 can be synced with TAP TEMPO or MIDI and LFO 2 can
be synced with LFO 1. You could say that LFO 1 and LFO 2 have a sort of master-slave
relationship.
