Sperry Marine 4914-CA, Operation, Installation And Service Manual

Page: 119 / 192

k^sfd^q u jh N MRSPQPLc
`çåÑáÖìê~íáçå=jÉåì=J=pÉêîáÅÉ=pÉíìé=N UJNP
pvpqbj=qvmb
Configures the system type and the heading selector device.
pvpqbj
Sets the system configuration
Settings: d
Single gyrocompass system: the control and display unit
shows own gyro heading only; the heading source selection
and heading difference alarm functions are not available.
dj
Gyro-/Magnetic compass system: the control and display
unit shows own gyro and magnetic compass headings;
heading source selection and heading difference monitoring
functions are available for sources G and M.
dd
Dual gyrocompass system: the control and display unit
shows both gyrocompass headings; heading source selec-
tion and heading difference monitoring functions are availa-
ble for sources G1 and G2.
ddj
Dual gyrocompass/Magnetic compass system: the control
and display unit shows both gyro and magnetic compass
headings; heading source selection and heading difference
monitoring functions are available for sources G1, G2
and M.
eadK=pbi=EÜÉ~ÇáåÖ=ëÉäÉÅíáçåF
Selects the heading source selector device to use.
Settings: `ar=N
Standalone system: the active heading source is selected at
the control and display unit
`ar=NHO
Dual gyrocompass system: the active heading source is
selected at either one of the gyrocompasses’ control and
display units
`ljmKjlk=EÅçãé~ëë=ãçåáíçêF
Multi compass system with Compass Monitor/Heading
Management system NAVITWIN: the active heading source
is selected at the NAVITWIN
^rqlmfilq
Gyrocompass/Autopilot system: the active heading source
is selected at the autopilot (NAVIPILOT V, ADII or V HSC)
buqK=pbiK=EÉñíÉêå~ä=ëÉäÉÅíçêF
The active heading source is selected using an external
selector switch