Sperry Marine 4914-CA, Operation, Installation And Service Manual

Page: 107 / 192

k^sfd^q u jh N MRSPQPLc
`çåÑáÖìê~íáçå=jÉåì=J=pÉêîáÅÉ=pÉíìé=N UJN
`Ü~éíÉê=UW póëíÉã=`çåÑáÖìê~íáçå
UKN `çåÑáÖìê~íáçå=jÉåì=J=pÉêîáÅÉ=pÉíìé=N
The Service Setup 1 provides access to the system parameters which
configure the NAVIGAT X MK 1 according to the requirements of the
installation at hand.
The Service Setup 1 also provides a test mode to check the proper func-
tion of the serial and 6 step/° heading outputs and the analogue rate of
turn output.
pÉíìé=^ÅÅÉëë=`çÇÉ
To prevent inadvertent or unauthorized changes to the system configu-
ration, setup menus which are to be accessed by service personnel only
are protected by access codes.
To access the Service Setup 1:
SERVICE SETUP
ENTER SETUP CODE
000
SERVICE SETUP 1
F1 INTERFACE I/O
F2 ANALOG ROT OUTP.
F3 FEEDBACK SIGNAL ü
MAIN MENU û
F1 DISPLAY DATA
F2 MANUAL SETTINGS
F3 SETUP MENU
SETUP MENU
F1 USER SETUP
F2 SERVICE SETUP
Press Shift-F2 to select "Service Setup"
When prompted for the setup code:
Enter code "
600
"
Press
Shift-ENTER
to confirm the code
The Service Setup 1 sub-menu opens
Call up the Main Menu
Press
Shift-F3 to select "Setup Menu"