Sperry Marine 4914-CA, Operation, Installation And Service Manual

Page: 96 / 192

MRSPQPLc k^sfd^q u jh N
TJS dóêçëéÜÉêÉ=fåëí~ää~íáçå
TKQ dóêçëéÜÉêÉ=fåëí~ää~íáçå
When the compass housing has been mounted and the system is wired
up so far that supply power is available, procedures should continue
with the installation of the gyrosphere into the gyrosphere container
and the mounting of the assembled container in the compass.
Alternatively, the installer may wire up the system completely and carry
out the initial system configuration before the gyrosphere is installed.
`^rqflk
Risk of damage through unauthorized service
Any service and installation work on the gyrosphere is to be carried out
by authorized service personnel only.
Never undertake service or installation work if unskilled for the certain
procedure.
kçíÉ For installation and service procedures of the gyrosphere and gyro-
sphere container, the following separate Installation, Maintenance and
Service Procedures, delivered with the gyrosphere, apply:
- 04911-0125-001, for gyrosphere type 2, gyrosphere container mod. 7/2
- 04911-0125-002, for gyrosphere type 2, gyrosphere container mod. 10/2
- 05000-0125-001, for gyrosphere type 3, gyrosphere container mod. 10/3
- 05000-0125-002, for gyrosphere type 3, gyrosphere container mod. 10/3
with the NAVIGAT X MK 1 in DP vessel application.