Sper scientific 850048, Instruction Manual

Page: 15 / 36

15
Restore Default Settings (P90)
1. Enter Function Mode. Press ▲or ▼ until “rSt P90”
is displayed.
2. Press ENTER . “No” will flash and “P91” will be displayed.
3. Press ▲or ▼ to change the status from “no” to “yes”.
4. Press ENTER to confirm. The meter will revert to the
factory default settings. To exit without restoring the
default settings, press CAL/ESC .
5. Press ▲or ▼ to continue to the next function or press
CAL/ESC to exit Function Mode.
DO
DO
P90 Reset to Default Adjustable
Use this option to reset the meters to
the factory default setting.
Press
△
or
▽
in the setup mode to
enter the r St P90 screen and select
the reset to default setting (Fig 16)
1.At P90 screen, press Enter key to
enter P91.The default set " no " icon
will be flashed on the main screen
.
(Fig 17) If you do not desire to reset
to the default setting, press Enter key
to confirm.
2.If you would like to reset the meter to
its factory default setting, press
△
or
▽
to switch the icon from “no” to “YES”
and then press ENTER key to confirm.
The screen will return to P90 screen.
(Fig 16)
Fig.16
Fig.17
16
Parameters Default Setting Value
P10 Memory Clear-CLr adjustable No.
P20 PH Electrode Slope Review 100%
P30 Cond. Calibration Review 146.6uS,1413uS
12.88mS, 51.5mS
P40 Cond. Cell Constant Review 1.00
P60 DO Review and Set parameters
adjustable
25
0
C, 0ppm, 0Meter
P70 Temperature unit setting adjustable Degree ℃
P90 Reset to Default Setting Adjustable No
DO
DO
P90 Reset to Default Adjustable
Use this option to reset the meters to
the factory default setting.
Press
△
or
▽
in the setup mode to
enter the r St P90 screen and select
the reset to default setting (Fig 16)
1.At P90 screen, press Enter key to
enter P91.The default set " no " icon
will be flashed on the main screen
.
(Fig 17) If you do not desire to reset
to the default setting, press Enter key
to confirm.
2.If you would like to reset the meter to
its factory default setting, press
△
or
▽
to switch the icon from “no” to “YES”
and then press ENTER key to confirm.
The screen will return to P90 screen.
(Fig 16)
Fig.16
Fig.17
16
Parameters Default Setting Value
P10 Memory Clear-CLr adjustable No.
P20 PH Electrode Slope Review 100%
P30 Cond. Calibration Review 146.6uS,1413uS
12.88mS, 51.5mS
P40 Cond. Cell Constant Review 1.00
P60 DO Review and Set parameters
adjustable
25
0
C, 0ppm, 0Meter
P70 Temperature unit setting adjustable Degree ℃
P90 Reset to Default Setting Adjustable No