10
Recall Readings
1. Press and hold
RECALL
for 2 seconds to enter
Recall Mode.
2. Press ▲ or ▼ to scroll through the data in memory.
3. Press
CAL/ESC
for 2 seconds to return to
Normal Mode.
O
C
DO
TEMP
MEMO
mg/l
ATC
This meter has the advanced setup
mode which allows you to customize
and check your meter's preferences
and defaults.If you would like to
change the parameters, please press
" SET " for more than 2 sec. to enter
the setup mode when the meter is in
the measurement mode.
NOTE:
To exit the function without saving in
the setup mode, press the CAL/ESC
key until the measurement mode
appears. If the meter is under the
setting value status, press the
CAL/ESC key twice to exit.
SETUP
9
Fig 18
Press any key to actirate the
backlight for 10 seconds
BACKLIGHT
Summary of Contents for 850048
