Sper scientific 850048, Instruction Manual

Page: 14 / 36

14
7. Press ENTER to confirm.
8. Press ▲or ▼ to continue to the next function or
press CAL/ESC to exit Function Mode.
Select Temperature Units Function (P70)
Temperature data can be displayed in either °C or °F.
1. Enter Function Mode. Press ▲or ▼ until “unt P70”
is displayed.
2. Press
ENTER
. “C” or “F” will flash and “P71” will
be displayed.
3. Press ▲or ▼ to change the temperature units.
4. Press ENTER to confirm.
5. Press ▲or ▼ to continue to the next function or
press CAL/ESC to exit Function Mode.
P70 Temperature unit adjustable
15
This function allows you to select the
unit of the temperature:
1. Press
△
or
▽
key in the setup mode
to enter the temperature unit P70
screen
.
Press the ENTER key to select
temperature unit setting.
“
unt
”
will
display on the left side of the screen
( Fig 14 )
2. At P70 screen, press ENTER key to
enter P71.
The default "C" will be flashed on the
main screen.
(Fig15). If the unit you need is degree
o C, press ENTER key to confirm.
O 3. If the unit you desired is degree F,
press
△
or
▽
key to change the C to F
and then press ENTER key to confirm.
The meter will return to P70 screen
(Fig 14)
Fig.14
Fig.15
P70 Temperature unit adjustable
15
This function allows you to select the
unit of the temperature:
1. Press
△
or
▽
key in the setup mode
to enter the temperature unit P70
screen
.
Press the ENTER key to select
temperature unit setting.
“
unt
”
will
display on the left side of the screen
( Fig 14 )
2. At P70 screen, press ENTER key to
enter P71.
The default "C" will be flashed on the
main screen.
(Fig15). If the unit you need is degree
o C, press ENTER key to confirm.
O 3. If the unit you desired is degree F,
press
△
or
▽
key to change the C to F
and then press ENTER key to confirm.
The meter will return to P70 screen
(Fig 14)
Fig.14
Fig.15