manualshive.com logo in svg

Spectrum SP-UV 200, Operating Manual, Page: 16 / 26

Share
Download
Spectrum SP-UV 200 Operating Manual Download Page 16

 

 
 

8.3 Round cell holder 

This special cell holder can be used for round cell of standard test kits. Cells with a diameter up to 16 mm 

and a high up to 11 cm can be used. 

 

Fig. 9

SP-UV 200

 Round cell holder 

 

8.4 Automatic cell changer 

The automatic cell changer accommodates 6 cells a 10mm path length cell of 12.5 x12.5 x 45 (L x W x H in 

mm). 

 

Fig.10 Automatic 6 cell changer 

To install this accessory in the sample compartment of the SP-UV 200 switch the device off, plug the 

electrical connection in the internal serial port at the back site of the sample compartment. Use two screws 

to install the system. Start the instrument new. 

 

8.5 Printer 

To install the printer to the SP-UV 200 switch the device off, plug the electrical connections into the USB at 

the back side of the device. Start the instrument new. 

 

 

 

 

 

User’s Manual SP-UV 200                                                                              16 
Spectrum Instruments 

Summary of Contents for SP-UV 200



























Reviews:

No comments