Tools Required
Read this owners manual before assembly or operation
Do not allow children to move lectern
Move slowly and carefully when mobile
Safety
Caster/Balloon wheel version:
A. Align the caster mounting holes with the base panel.
Figure 1A
.
1. Base Panel Assembly
(16) 053310
1/4-20 x40mm JC Bolt
w
are
Lectern Assembly (#55420 only)
(4) 059984
2" Snap-in Grommet
(15) 044541
1/4-20 x20mm JC Bolt
(6) 050184
10-32 x 5/8" PHMS
(1) 025039
4mm Hex Wrench
(8) 026064
1/4-20 x 5/8" PHMS
Hardware Package Contents
(1) 039662
2" Grommet
7/16" or Adjustable
Wrench
Phillips Head
Screwdriver
4mm Hex Wrench
0110042 Page 2 of 10
A. Align the caster mounting holes with the base panel.
Figure 1A
.
Note: The two swivel casters will attach to the curved side of the panel.
B. Attach each caster to the base panel using (4) 1/4-20 x 40mm JC bolts,
(4) 1/4" washers, and (4) 1/4-20 locknuts. Tighten securely.
C. Install the 2" grommet in the base panel.
Rigid caster
1/4-20 x 40mm JC bolts
(4 per caster)
1/4-20 locknut
(4 per caster)
1/4" flat washer
(4 per caster)
2" Grommet
Curved side
of base panel
Swivel caster
Swivel caster
Figure 1A
(16) 053310
1/4-20 x40mm JC Bolt
(16) 041943
1/4-20 Locknut
(16) 026059
1/4" Flat Washer
Cas
ter Hardw
a
r
0110042 Page 2 of 10
