A. Insert the rear panel tabs into base panel slots
as shown.
Figure 6
.
B. Tilt up and lock into place.
6. Rear Panel Attachment
Figure 6
Rear Panel
Base Panel
Slots
0110042 Page 6 of 10
Figure 7A
Shelf will automatically lock into place when lifted into the horizontal position with the
levers released.
Figure 7A
.
To lower or flip-up the shelf, press and hold the lever under each folding shelf bracket
at the same time while slowly lowering or raising the shelf.
Figure 7B
. Do not exceed
a maximum of 50 lbs of weight on the shelf. Do not move the cart while the shelf is in
the horizontal position.
Optional Flip-up Shelf Operation
Release Lever
(press here)
Folding Shelf
Bracket
Figure 7B
Note: Power & communication wiring for
document cameras, laptop computers, and/or
projectors placed on the flip-up shelf should be
routed on top of the audience-side of the shelf.
Use of the shelf grommet hole for wiring will
result in pinching of the cords when the shelf is
folded.
CAUTION:
BE CAREFUL NOT TO PINCH
FINGERS WHILE LOWERING!
Figure 6
Slots
Setup & Operation
0110042 Page 6 of 10
