A. Attach the worksurface to the lectern with (7) 1/4-20 x 20mm JC bolts.
Figure 4
.
B. Tighten securely.
4. Worksurface Assembly
Worksurface
1/4-20 x 20mm
JC bolts
(7 req'd)
0110042 Page 5 of 10
A. To attach the blank, align the mounting holes at the top or bottom of
the rack rails and secure with (6) 10-32 x 5/8" PHM screws.
Figure 5
.
B. Tighten securely.
5. Rack Mount Blank
10-32 x 5/8"
PHM screws
(6 req'd)
Rack mount
blank
Figure 4
Figure 5
Note: For structural rigidity, the rack mount blank or rack mount equipment
should be attached at the top or bottom of the rails. To increase available
rack space, the rack mount blank can be left off as long as rack mount
equipment is installed at the top or bottom of the unit.
Rack rail
0110042 Page 5 of 10
