Toe kick version:
A. Attach the left and right toe kick side panels to the front and rear panels
with 1/4-20 x 20mm JC bolts and 1/4-20 locknuts.
Figure 1B
.
B. Attach the base panel to the toe kick with (4) 1/4-20 x 40mm JC bolts as shown.
C. Attach the cover plates with 1/4-20 x 20mm JC bolts.
D. Install the 2" grommet in the base panel, and 2" snap-in grommets in the side panels.
E. Attach the (4) black screw caps to the (4) base panel JC bolts.
F. Proceed to step 2.
Curved side of
1/4-20 x 40mm JC bolts
(4 req'd)
2" Grommet
(16) 044541
1/4-20 x20mm JC Bolt
(4) 051843
9/16" black screw caps
(2) 059984
2" Snap-in Grommet
(4) 053310
1/4-20 x40mm JC Bolt
(8) 041943
1/4-20 Locknut
Toe
k
ick Hardw
a
re
Black Screw Caps
0110042 Page 3 of 10
Curved side of
base panel
Figure 1B
Front toe kick panel
Rear toe kick panel
Left toe kick panel
Right toe kick panel
1/4-20 x 20mm
JC bolts
(4 req'd per side)
Cover plate
1/4-20 locknut
(4 req'd per side)
1/4-20 x 20mm JC bolts
(4 req'd per plate)
Snap-in
Grommet
Note: The two grommet holes will
be opposite the curved side of the
base panel.
0110042 Page 3 of 10
