background image

Power Cord

Upper Side Panel 

Grommet

A.  The cord reel provides 15' of cord and will handle a maximum of 15-amps.  

Figure 8

.

B.  To latch, pull cord out to full-length.  Allow the cord to retract 1-2 feet back into the reel.  Pull 

the cord out slowly-when a 'click' is heard, the cord will lock in place.  Plug into wall outlet.

C.  To release the cord, unplug from wall outlet, and slowly pull cord out until clicking stops.  The 

lock will release and the cord can be guided slowly back into the reel.  

DO NOT allow the cord to fly unrestricted back into the reel.

Optional Cord Reel Operation

Figure 8

0110042 Page 7 of 10

A.  Before moving the unit, unplug all power cords and wrap excess cords around the

cord wrap brackets as necessary 

(Figure 9) 

or retract power cord into reel (if equipped).

B.  Be sure the casters are in the unlocked position, Soor(s) closed AND ANY SHELCES
C.  Move the lectern slowly and carefully.
D.  Lock the casters after moving.

Lower Side Panel 

Grommet

Moving the Lectern

Figure 9

WARNING

UNIT CAN TIP OVER RESULTING IN RISK OF INJURY.  
MOVE SLOWLY.  DO NOT ALLOW CHILDREN TO MOVE.

0110042 Page 7 of 10

Summary of Contents for Academic Lectern 55421











Reviews: