A. Align the left and right side panels as shown.
Figure 2
.
B. Attach each side panel to the base panel using (2) 1/4-20 x 20mm JC bolts and tighten securely.
C. Attach the rear panel to the side panels with (4) 1/4-20 x 20mm JC bolts.
2. Side and Rear Panel Assembly
Rear Panel
Figure 3A
Rack Rail
Right Side
Panel
Left Side
Panel
1/4-20 x 20mm JC bolts
(2 per panel)
Snap-in
Grommet
1/4-20 x 20mm JC bolts
(4 req'd)
0110042 Page 4 of 10
A. Install the 2" snap-in grommets into the side panels.
Figure 3A
.
B. With the rack rails pointing inward as shown, attach each rack rail to the
front of each side panel using (4) 1/4-20 x 5/8" PHM screws.
Figure 3B
.
3. Rack Rail and Grommet Assembly
Figure 2
Figure 3B
1/4-20 x 5/8" PHM screws
(4 req'd per rail)
Base Panel
Side Panel
0110042 Page 4 of 10
