Spectrum Digital TMS320DM368, Technical Reference

Page: 82 / 146

Spectrum Digital, Inc
3-34 DM368 EVM Technical Reference
3.5 Jumpers
The following section describes the jumpers on the DM368 EVM.
3.5.1 JP1, Jumper Block
Jumper block JP1, found on schematic page 39, allows the user to connect signals
from the DM368 processor to the TVL320AIC3101, U7. The signals on this 9 x 2
header are shown in the table below.
3.5.2 JP2, Unpopulated Jumper
Jumper JP2, found on schematic page 14, is unpopulated and not used.
3.5.3 JP28, Unpopulated Jumper
Jumper JP28, found on schematic page 14, is unpopulated and not used.
Table 43: JP1, Jumper Block
Pin # Signal Name Pin # Signal Name
2 AIC_McBSP_CLKX 1 AIC_BCLK, U7, Pin 2
4 AIC_McBSP_CLKR 3 AIC_BCLK, U7, Pin 2
6 AIC_McBSP_FSX 5 AIC_WCLK, U7, Pin 3
8 AIC_McBSP_FSR 7 AIC_WCLK, U7, Pin 3
10 AIC_McBSP_DX 9 AIC_DIN, U7, Pin 4
12 AIC_McBSP_DR 11 AIC_DOUT, U7, Pin 5
14 I2C_DATA 13 SDA, U7, Pin 9
16 I2C_SCLK 15 SDL, U7, Pin 8
18 Ground 17 Ground