Spectrum Digital, Inc
1-9
1.7.1 DM368 UIM Installation on DM368 EVM Checklist
To install the DM368 UIM on the DM368 EVM execute the following checklist:
o
Turn
off
the power to your DM368 EVM !
o
Align connectors J1, J2, and J6 of the UIM with connectors J18, J19,and J23 on
the DM368 EVM.
o
Visually inspect the alignment of the connectors from the card edge (Spectrum
Digital logo) to insure all 6 connectors are mated together.
o
Carefully push the UIM down onto the DM368 EVM.
o
Turn on the power to your DM368 EVM and verify operation.
Figure 1-6, Align UIM and DM368 EVM Connectors
J2 to J18
J1 to J19
J6 to J23
Summary of Contents for TMS320DM368
