Spectrum Digital, Inc
1-10
DM368 EVM Technical Reference
1.7.2 Removal of UIM from the DM368 EVM Checklist
To remove the UIM from the DM368 EVM execute the following checklist:
o
Turn
off
the power to your DM368 EVM !
o
Carefully lift the edges of the UIM circuit board up. If necessary rotate lifting from
right side, bottom edge, left side, right side, .... until the UIM is free from the DM368
EVM.
o
Safely store the UIM in an anti-static bag.
o
Turn on the power to your DM368 EVM and verify operation.
Figure 1-7, Removal of UIM from DM368 EVM
right
bottom
left
Summary of Contents for TMS320DM368
