SpectraLink 8400 Series, Deployment Manual, Page: 65 / 134

Troubleshooting SpectraLink 8400 Series Handsets
55
• Rate : One or more basic rates are not supported
• Full : The AP cannot handle the bandwidth requirements
• AthT : Authentication timeout
• AscT : Association timeout
• AthF : Authentication failure
• AscF : Association failure
• SecT : Security handshake timeout
• SecF : Security handshake failure
• Cnfg : The AP is not configured correctly for security, QOS, or
infrastructure network
Run Site Survey
Run Site Survey is used to evaluate the facility coverage before certifying that
an installation is complete. It can also be used at any time to evaluate coverage
by testing signal strength, to gain information about an AP, and to scan an area
for all APs regardless of the Service Set Identifier (SSID). The AP information
available through the site survey includes:
• SSID
• Beacon Interval
• AP information regarding support of 802.11d, 802.11h, and other 802.11
amendment standards as required
• Current security configuration
From the Home Screen, select Settings , and then select Advanced Settings >
Administration Settings > Diagnostics > Run Site Survey .
The Site Survey uses the user-configured bands/sub-bands for its scanning. If
the site survey is not able to understand which bands are allowed for the
scanning, it will not proceed and the error message Cannot run site survey
with current configuration displays.
The Site Survey will not start if:
• The Wi-Fi is disabled.
• The regulatory domain is not set.
• The 5z GHz and 2.4 GHz bands are both disabled.