SpectraLink 8400 Series, Deployment Manual, Page: 36 / 134

Polycom® SpectraLink® 8400 Series Wireless Telephone Deployment Guide
26
EzARBgNVBAMUCmhzX3dsYW5fY2EwgZ8wDQYJKoZIhvcNAQEBBQADg
Y0AMIGJAoGBAJzESpj3Rshcw7cR9dSpQDu0TtN1CnfVJTCIdehkLD
X4Msns4ZvlIfhoBhAQpd47ec”
f
If you selected EAP-FAST for the EAP type and want to perform
out-of-band provisioning—the PAC file can be loaded into the
handset during configuration:
» Disable in-band provisioning
(
device.wifi.wpa2Ent.eapFast.inBandProv=”0”
).
» Set the PAC file password (device.pacfile.password).
» Set the PAC file (
device.pacfile.data
).
Since the PAC file is, by default, a binary file, it cannot be stored
in the configuration file in this form. You must convert the PAC
file to a base64 encoded file. Copy only the contents between the
“-----BEGIN CERTIFICATE-----” and “-----END
CERTIFICATE-----” without hard returns.
For example (without hard returns):
device.pacfile.data=”AQApB81pXXvXyO1Uy25OkTnp
yAuqb+23455Kfnfg4WFkffwergr72ef57g/llGgheO4xH3Ne9I/ky
qmolQN0eis6B7YoLHh3N9G9kIltg98fldUm9GxCsSvsyI
BjxKceqzkyPgpDAxhV/vZesD7Q6XI3464SGkm0O+Hewex
jXFyY0WJNE0TXyNQhOwR27KQRqZYrUq9BqyDE9FFZoWEA3Jtog9zE
h0QZEe4TkGeKQotlaT0DPLaafCdCwXGd7aDQfC8eMEtX2
gMpPoDIhv9RXVunca3T4JXVWrumQxD7rm1Dl/MKjsi/BF
qpABSetXVc=“
When using an XML editor, leave out the quotation marks at the beginning and end
of the certificate and remove the line feeds/hard returns.
Use openssl command to convert the file to base64 encoded file:
$ openssl enc -base64 -in eapuser.pac -out eapuser.pac.b64