SpectraLink 8400 Series, Deployment Manual, Page: 34 / 134

Polycom® SpectraLink® 8400 Series Wireless Telephone Deployment Guide
24
c
Set the passphrase (
device.wifi.psk.key
).
The value must be 8 to 63 ASCII characters in length.
11
Set WPA2- Enterprise Security configuration parameters as follows:
a
Set the fast roaming method to one of the methods supported on your
wireless infrastructure. (
device.wifi.wpa2Ent.roaming
)
The possible values are:
» OKC (default)
» CCKM
b
Set the WPA2- Enterprise Security user name
(
device.wifi.wpa2Ent.user
).
By default, the value is PlcmSpIp .
c
Set the WPA2- Enterprise Security password
(
device.wifi.wpa2Ent.password
). By default, the value is
PlcmSpIp .
d
Set the EAP type used for authentication
(
device.wifi.wpa2Ent.method
).
The possible values are:
» EAP-PEAPv0-MSCHAPv2. (default) See step e .
» EAP-FAST . See step f or g .
e
If you selected PEAPv0/MSCHAP/-v2 for the EAP type:
» Select the security profile
(
device.sec.TLS.profileSelection.dot1x
). The possible
values are PlatformProfile1 and PlatformProfile2 .
Only the values EAP-PEAPv0-MSCHAPv2 and EAP-FAST are supported. Using
any other value may cause connectivity issues.