SpectraLink 8400 Series, Deployment Manual, Page: 23 / 134

Deploying SpectraLink 8400 Series Handsets
13
3
Connect the handset to the computer designated as the WCS using the
micro USB cable, as shown next.
The Found New Hardware wizard opens.
Connecting the handset to the WCS launches the Found New Hardware
wizard automatically. Be sure to leave the handset connected to the WCS
for as long as it takes to fully change the phone’s wireless configuration
parameters.
The Found New Hardware wizard only displays the first time you use
each USB slot on your computer.
4
In the wizard:
— Select No, not this time , and click Next .
— Select Install from a list or specific location (Advanced) and click
Next .
— Select Search for the best driver in these locations .
— Select the check box for Include this location in the search:
— Browse to your 84xx.inf or 84xx-64 .inf and click Next .
The Linux USB Ethernet/RNDIS Gadget is installed.
A warning will be displayed indicating this driver
has not passed
Windows Logo testing .
— Select Continue Anyway .
— Click Finish .
Depending on the USB port you choose on the WCS, you may also encounter a
Windows alert advising you of a higher speed connection available with a different
USB port. You can safely ignore this message or, if you want, you can choose
another USB port on your computer that provides high-speed USB 2.0 support.