SpectraLink 8400 Series, Deployment Manual, Page: 31 / 134

Deploying SpectraLink 8400 Series Handsets
21
4
Enable the wireless interface (
device.wifi.enabled=”1”
).
5
If you want to use DHCP addressing, enable the DHCP flag on the
wireless interface if not using static IP addressing
(
device.wifi.dhcpEnabled=”1”
).
If you want to use static IP addressing, do the following:
— Disable the DHCP flag if you are using static IP addressing
(
device.wifi.dhcpEnabled=”0”
).
— Set the network address of the wireless interface if not using DHCP
(
device.wifi.ipAddress=”192.168.0.100”
).
— Set the network mask address of the wireless interface if not using
DHCP (
device.wifi.subnetMask=”255.0.0.0”
).
— Set the IP gateway address for the wireless interface if not using
DHCP (
device.wifi.IPgateway=”192.168.0.1”
).
6
Set the DNS parameters to appropriate values for your organization.
For example, DNS domain name (
device.dns.domain
), DNS server name
(
device.dns.serverAddress
), and DNS alternate server name
(
device.dns.altSrvAddress
).