SpectraLink 8400 Series, Deployment Manual, Page: 22 / 134

Polycom® SpectraLink® 8400 Series Wireless Telephone Deployment Guide
12
3
Extract the following file from the UC Software ZIP file to the newly
created folder:
000000000000.cfg
For a detailed description of each file contained in the UC Software ZIP
file, see the Release Notes found at
http://support.polycom.com/support/spectralink8400 .
4
Start the FTP server software and configure it to accept requests from the
handset.
In the FTP server software on a computer, create a user with a name and
password identical to the phone’s default user name and password: user
name PlcmSpIp with password PlcmSpIp .
For more information on how to set up the server, see your FTP server
documentation.
Enable the Handset’s Network Capabilities
If the WCS computer is not running Microsoft Windows 7, you must copy
84xx.inf to the WCS so that the computer can detect your SpectraLink 8400
Series Handsets as a USB network device. You will add the handset as a
network device with Windows Add New Hardware wizard.
To enable the handset’s networking capabilities:
1
Log into the computer as the administrator.
2
(Optional) Download and copy 84xx.inf onto your 32-bit computer or
copy 84xx-64.inf onto your 64-bit computer from
http://support.polycom.com/support/spectralink8400.
The 84xx.inf file applies to 32-bit computers running Microsoft Windows® XP SP3
and Microsoft Vista® SP1. If you are using a 64-bit computer running Microsoft
Windows Vista operating system, you must use the
84xx-64.inf file.
Computers running Linux do not require 84xx.inf or 84xx-64.inf .