Allocate Files to File Groups
59
Files are flushed a
preset length of time
after writing
Select Flush written files from disk and After and put an appropriate
number in the box. With these options selected, files will be flushed a
defined length of time after they were written, or when the last
replica has been completely written to tape, whichever comes later.
To prevent the file from being stored to disk indefinitely after a
restore: select Flush read files from disk and
As soon as file is read.
With this,
files are flushed from disk at a preset interval after the file is
written to disk; when the file is restored, it is then flushed as soon as
the file is read from disk.
Files are flushed
immediately after
being read
Select Flush read files from disk and As soon as the file is read.
Ensure that the option Flush written files from disk is unchecked.
With these options selected, files are flushed as soon as the file is
closed. Note that files that have been written to the system are
retained on disk indefinitely, until they are read.
Files are flushed a
preset length of time
after being read
Select Flush read files from disk and After and put an appropriate
number in the box. Ensure that Flush written files from disk is
unchecked. This option is similar to the
Files are flushed immediately
after being read
option, but waits for the defined period before it
applies its rule. As with that option, files are retained on disk
indefinitely, unless they are read.
Option
Description
4
Leave unchecked
Leave unchecked
4