background image

Prepare the nTier Windows Server

39

Removing NFS

1.

From the nTier Windows Desktop, select 

Start > Settings > Control Panel > Add/

Remove Programs

.

2.

On the left side of the Add or Remove Programs window, select 

Add/Remove 

Windows Components

.

3.

Scroll through the list of Windows components and select 

Other Network File and 

Print Services

.

4.

Select 

Details

.

5.

Clear the check box next to Microsoft Services for NFS, then select 

OK

 to return to 

the list of Windows components.

6.

Select 

Next

, then select 

Finish

.

7.

If you are prompted to Restart Windows, select 

Yes

.

8.

After the nTier server completes its restart, reconnect to the BlueScale web interface 
and access the Windows Desktop (see 

Access the nTier Windows Desktop

 on 

page 35).

9.

Repeat Steps 1 through 5 to confirm that 

msnfsflt

 is no longer listed.

Re-Enabling NFS

If you stop using the nTier File Migrator software, you may want to re-enable NFS so 
that the nTier drives can be mapped by other systems over the network.

1.

Connect to the nTier’s BlueScale web interface and access the Windows Desktop 
(see 

Access the nTier Windows Desktop

 on page 35).

2.

From the nTier Windows Desktop, select 

Start > Settings > Control Panel > Add/

Remove Programs

.

3.

On the left side of the Add or Remove Programs window, select 

Add/Remove 

Windows Components

.

4.

Scroll through the list of Windows components and select 

Other Network File and 

Print Services

.

5.

Select 

Details

.

6.

Select the check box next to Microsoft Services for NFS, then select 

OK

 to return to 

the list of Windows components.

7.

Select 

Next

, then select 

Finish

.

8.

If you are prompted to Restart Windows, select 

Yes

.

Summary of Contents for Spectra nTier File Migrator





























































































Reviews: