Chapter 4 - Installation
Installing an HBA in the Master Node
7.
Guide the connectors on the HBA through the slot on the rear of the chassis.
CAUTION
Be careful not to damage the connectors on the HBA as you guide them through the slot
on the rear of the chassis.
8.
Press down on the HBA to secure it in the socket on the motherboard. The card will fit
firmly in the socket.
Note:
This image shows the 10 GigE HBA. The SAS HBA is installed in a similar manner.
Figure 15
Install the HBA.
9.
Using a #2 Phillips screwdriver, install the bracket screw to secure the HBA to the chassis
(see
).
January 2022
Installation Guide-Spectra BlackPearl NAS Solution
- 33 -
