Speck pumps BADU ECOM2/S90, Installation, Operating And Service Manual

Page: 16 / 28

M017837080000 REV. January 19, 2011
2EZ Speed
TM
Pool Motor with Programmable Control/Timer
M017837080000 REV. January 19, 2011
2EZ Speed
TM
Pool Motor with Programmable Control/Timer
user Interface Identi cation
This section describes the user interface in detail, including buttons, and LCD data.
user Interface Identi cation
This section describes the user interface in detail, including buttons, and LCD data.
In MEnu mode, the clock and day of the week will be used to set the Clock, On Time,
and Off Time for all settings, and while in RUN mode, it will display the set time and day
of the week.
When setting the clock, the user will be prompted to also the select the current day of
the week. While in RUN mode the current day of the week will be illuminated based on
the user setting.
Press Enter to Con rm is illuminated during the MENU mode, This will remind the
user that pressing enter will confirm the settings the user has selected. While in MENU
mode, a second press of the enter key will move the navigation forward to the next
menu item even if there is no change made to that particular setting.
Press the MEnu button. This menu allows you to set the time, day of the week,
and for setting or reviewing the current schedule for Pump On and Off times for
Low and High speeds.
Program icon is illuminated while a programmed setting is in process of running.
The Low icon is illuminated when the pump is in Low speed or when the Low speed
is being programmed by the user.
The High icon is illuminated when the pump is on in High speed or the High speed is
being programmed by the user. noTE: While pump is priming, HIGH will be flashing.
Set Clock is flashing and illuminated after pressing menu and illuminated while
programming the clock and time of day.
Set on Time is flashing and illuminated after pressing menu. Also illuminates while
programming the On Time as the user navigates through the setting of both High and
Low Speeds for both Monday thru Friday and Saturday/Sunday settings.
The Menu item Set off Time is flashing and illuminated after pressing menu. Also
illuminates while setting the Off Time as the user navigates through the setting of both
High and Low Speeds for both Monday thru Friday and Saturday/Sunday settings.
override , is illuminated after the user has selected one of the Override buttons,
and while it is in Override mode.
1
1
2
2
3
3
4
5
6
7
8
www.nidec-motor.com/Pool www.nidec-motor.com/Pool
MEnu
HIGH SPEED
o ErrIDE
HIGH SPEED
o ErrIDE
LoW SPEED
o ErrIDE
LoW SPEED
o ErrIDE
run / SToP run / SToP
Low High
1 : AM
MTuWThFSaSu
Program
Press Enter to Con rm
Low High
1 : AM
MTuWThFSaSu
Program
Press Enter to Con rm
Set Clock
Set on Time
Set off Time
override
Set Clock
Set on Time
Set off Time
override
MEnu
EnTEr EnTEr
1
1
3
2
5
6
7
8
2
3
4
M017837080000 REV. January 19, 2011
2EZ Speed
TM
Pool Motor with Programmable Control/Timer
M017837080000 REV. January 19, 2011
2EZ Speed
TM
Pool Motor with Programmable Control/Timer
user Interface Identi cation
This section describes the user interface in detail, including buttons, and LCD data.
user Interface Identi cation
This section describes the user interface in detail, including buttons, and LCD data.
In MEnu mode, the clock and day of the week will be used to set the Clock, On Time,
and Off Time for all settings, and while in RUN mode, it will display the set time and day
of the week.
When setting the clock, the user will be prompted to also the select the current day of
the week. While in RUN mode the current day of the week will be illuminated based on
the user setting.
Press Enter to Con rm
is illuminated during the MENU mode, This will remind the
user that pressing enter will confirm the settings the user has selected. While in MENU
mode, a second press of the enter key will move the navigation forward to the next
menu item even if there is no change made to that particular setting.
Press the MEnu button. This menu allows you to set the time, day of the week,
and for setting or reviewing the current schedule for Pump On and Off times for
Low and High speeds.
Program icon is illuminated while a programmed setting is in process of running.
The
Low
icon is illuminated when the pump is in Low speed or when the Low speed
is being programmed by the user.
The High icon is illuminated when the pump is on in High speed or the High speed is
being programmed by the user. noTE: While pump is priming, HIGH will be flashing.
Set Clock is flashing and illuminated after pressing menu and illuminated while
programming the clock and time of day.
Set on Time is flashing and illuminated after pressing menu. Also illuminates while
programming the On Time as the user navigates through the setting of both High and
Low Speeds for both Monday thru Friday and Saturday/Sunday settings.
The Menu item
Set off Time
is flashing and illuminated after pressing menu. Also
illuminates while setting the Off Time as the user navigates through the setting of both
High and Low Speeds for both Monday thru Friday and Saturday/Sunday settings.
override , is illuminated after the user has selected one of the Override buttons,
and while it is in Override mode.
1
1
2
2
3
3
4
5
6
7
8
www.nidec-motor.com/Pool www.nidec-motor.com/Pool
MEnu
HIGH SPEED
o ErrIDE
HIGH SPEED
o ErrIDE
LoW SPEED
o ErrIDE
LoW SPEED
o ErrIDE
run / SToP run / SToP
Low High
1 : AM
MTuWThFSaSu
Program
Press Enter to Con rm
Low High
1 : AM
MTuWThFSaSu
Program
Press Enter to Con rm
Set Clock
Set on Time
Set off Time
override
Set Clock
Set on Time
Set off Time
override
MEnu
EnTEr EnTEr
1
1
3
2
5
6
7
8
2
3
4