User Manual
30
Replace the spacer bar (
20
) centrally onto the top cooling block (
2
) and
slowly lower the top bolster pressing surface (
8
) by a clockwise rotation
of the lead screw (
9
) until
all the components of the pressing
system
(the top bolster surface (
8
), the spacer bar (
20
), Top Half
Assembly, foils and sample “sandwich” and Lower Half Assembly) are
just touching each other. These components should be fairly loosely
held together at this stage, prior to heating and melting of the sample.
(See
Fig 19.)
Fig 19. Components of Pressing System in Sampling Position
Loosely Clamped Together Prior to Heating
Note:
A tonnage load to pressurise the components together should
NOT
be applied via pumping of the press piston at this time.
8
20
2
4
18
5
12
Summary of Contents for Atlas GS15800
