Atlas™ High Temperature Film Maker Accessory
11
5. Installation of the High Temperature Film
Maker Accessory
For installation of the Atlas™ High Temperature Film Maker Accessory
into a Specac Press the procedure is as follows.
Connecting the Water Cooling System
A cold water supply for the water cooling system circuit is required for
operation of the Atlas™ High Temperature Film Maker Accessory.
After passage through the cooling system, the water can flow to a drain
or be re-circulated if a suitable thermo-circulating system has been
employed for use in the water cooling circuit. (See water cooling
thermo-circulator systems, Specac P/N’s GS11127 and GS11128.)
The High Temperature Film Maker Accessory will be supplied with
water cooling black silicone tubing and Quick Connect couplings (
6
)
and (
7
) already connected to the top (
2
) and lower (
3
) cooling block
parts to allow for cooling water to be introduced. The top (
2
) and lower
(
3
) cooling blocks will also already be connected together by black
silicone tubing to allow the flow of cooling water from one block
through to the other.
By convention, any supply of cooling water is introduced into the lower
cooling block (
3
) and then passes to flow through the top cooling block
(
2
). The black silicone tubing attached to the lower cooling block (
3
) for
water introduction is supplied finished with a Quick Connect
body
coupling (
6
). The black silicone tubing attached to the top cooling block
(
2
) for water flow out is supplied finished with a Quick Connect
insert
coupling (
7
). (See
Fig 2.
)
The Quick Connect couplings are a simple push fit from the insert (
7
)
into the body (
6
). The parts will “click” together when fully engaged. To
disconnect, the silver disc on the body (
6
) is pushed down whilst the
couplings are being pulled apart. When these Quick Connect couplings
are disconnected, water is prevented from leaking out of the silicone
tubing, thus avoiding accidental spillage.
Summary of Contents for Atlas GS15800
