Atlas™ High Temperature Film Maker Accessory
25
Relax your grip on the arms of the sample cup tool (
24
) to allow the
pressing surface jaws to separate. Now, very carefully remove the
foam pad (
25
) and cup parts (
22
) and (
23
) from the sample cup tool
(
24
) and then carefully remove the cup parts (
21
) and (
22
) from the
foam pad (
25
). Set these pre-formed cup parts (
22
) and (
23
) aside to
use when introducing a sample into the High Temperature Film Maker
Accessory that has been installed into the Press.
Placing a Sample into the Film Maker Accessory
When a sample cup (
22
) and sample cup cover (
23
) have been
prepared, a sample can be introduced into the Film Maker Accessory
that has already been installed into the Press.
To accept a sample cup with sample, the Top Half Assembly of the
High Temperature Film Maker Accessory should be re-positioned from
the
Sampling Position
(See
Fig 6
.) to the Loading Position (See
Fig
13
.) The Top Half Assembly is moved by use of the lifting handle (
16
)
into the top resting slots (
17
) of both side support brackets (
15
) as
shown in
Fig 13
, for the
Loading Position
.
Fig 13. Loading Position of the High Temperature Film Maker
Accessory (Shown Outside of Press for Clarity)
16
15
17
Summary of Contents for Atlas GS15800
