Specac Atlas GS15800, User Manual, Page: 21 / 48

Atlas™ High Temperature Film Maker Accessory
19
Lift both the original front safety guard with magnetic stop catch and
the modified rear safety guard on the Press and feed through the High
Temperature Film Maker Accessory from the rear of the Press with the
handles (
12 ) and ( 16 ) on the Accessory projected towards the front of
the Press. In this orientation the water cooling tubing connections will
be projecting away from the rear of the Press. Ensure that the recess
diameter hole at the base of the lower cooling block (
3 ) fits perfectly
over the lower bolster piston pressing surface ( 19 ) of the Press.
The rear modified safety guard on the Press can now be lowered such
that it comes to rest on top of the water cooling silicone tubing and
power cables for
the High Temperature Film Maker Accessory that are
projecting outwards from the rear of the Press.(See Fig 7 .)
Fig 8. High Temperature Film Maker Accessory Installed into a
Manual Hydraulic Press (Sampling Position - Front Guard Closed)
20
12
4
5
16